TO-22-C011 – Air Source Chiller/Heat Pump in a Hybrid System for Cold Climate Heating, First Year's Experience

• by admin
• Comments Off on TO-22-C011 – Air Source Chiller/Heat Pump in a Hybrid System for Cold Climate Heating, First Year's Experience
• ASHRAE

Click here to purchase

In the continuing search for economical and low carbon solutions to heating systems in cool climates, designers often turn to heat pumps, including air source units. Hydronic distribution has a number of advantages particularly when longer distances are encountered. Capacity does not always come cheaply, even using air source equipment, and electrical demand costs can diminish the operating cost benefit of heat pumps. Utilization of a hybrid heat pump/conventional heating system can mitigate these disadvantages while still providing benefits of a low carbon heat source.

This paper describes the use of a conventional air cooled chiller/heat pump in a low temperature hydronic heating system for a public works garage/vehicle storage area, its design, commissioning, and first year’s operating experience. It will describe the approaches taken to maximize the efficiency of the heat pump by minimizing required water temperatures, including radiant floor heating and high capacity fin tube and air coils. The utilization of the backup heating source to minimize installed cost, control electrical demand charges, and provide system redundancy will be described. Finally, the challenges of using fairly conventional air cooled equipment for cold climate heating will be described. Defrost cycle control and actual heating Coefficients of Performance will be examined using data from the building automation system.