HI-85-03-3 — AC Pressurization: A Technique for Measuring Leakage Area in Residential Buildings
- Comments Off on HI-85-03-3 — AC Pressurization: A Technique for Measuring Leakage Area in Residential Buildings
- ASHRAE
This report presents a new technique for measuring the leakage area of residential buildings. This technique, called AC pressurization, is designed to overcome most of the shortcomings of fan pressurization, the conventional technique for measuring leakage area. The fan pressurization technique (often performed using a blower door ) has several known deficiencies: (1) the pressures it exerts on the building envelope are significantly higher than those experienced under natural conditions, thereby requiring extrapolation outside of the measurement range to calculate the leakage area; (2) it cannot make real-time leakage area measurements; and (3) the large volumes of air displaced by the fan can cause inconveniences such as large indoor temperature changes. AC pressurization, which induces sinusoidal pressure differences across the building envelope, can make real-time leakage measurements at. low pressures without inducing large flows through the building envelope. The AC pressurization apparatus and analytical technique, as well as the laboratory measurements that determined the specifications for the field device are described herein. Field measurements of leakage area obtained with a prototype AC pressurization device are compared with those obtained by fan pressurization tests of six single family residences.
Units: SI
Citation: Symposium, ASHRAE Transactions, 1985, vol. 91, pt. 2B, Honolulu, HI
Product Details
- Published:
- 1985
- Number of Pages:
- 13
- File Size:
- 1 file , 5.4 MB
- Product Code(s):
- D-HI-85-03-3
