CGA P-56

Click here to purchase
This publication applies to cryogenic liquid supply systems, located either on a customer site or a production site, where cryogenic liquid is vaporized and is then supplied either as the primary or secondary source of gaseous product. This publication is limited to the prevention of brittle fracture in piping and associated equipment installed downstream of the vaporization system.

The secondary source of supply can be a back-up supply to a production plant when the production plant trips or is shut down, a supplementary supply to meet customer demand where it exceeds the capacity of the production plant (peak shaving), or as a back-up supply at a customer site (for example, a healthcare facility).

The safeguard principles presented in this publication apply to any process fluid supply system where the temperature of the cryogenic liquid source is less than the minimum temperature rating of the piping and/or associated equipment downstream of the vaporizer.

Product Details

Edition:
3
Published:
11/21/2022
Number of Pages:
34
File Size:
1 file , 470 KB
Note:
This product is unavailable in Russia, Ukraine, Belarus

CGA P-56

Click here to purchase
This publication applies to cryogenic liquid supply systems, located on either a customer site or a production site, where cryogenic liquid is vaporized and is then supplied either as the primary or secondary source of gaseous product. It has been written to identify the hazards associated with cryogenic liquid vaporization systems and to recommend the safeguards to be taken. It recommends safe practice for the design of new cryogenic vaporizer systems.

Product Details

Edition:
1st
Published:
09/12/2006
Number of Pages:
22
File Size:
1 file , 360 KB

CGA P-56

Click here to purchase
This publication applies to cryogenic liquid supply systems, located either on a customer site or a production site, where cryogenic liquid is vaporized and is then supplied either as the primary or secondary source of gaseous product. This guideline is limited to the prevention of brittle fracture in piping and associated equipment.

The principles presented in this publication apply to any low temperature process fluid supply system where the temperature of the fluid is lower than the minimum temperature rating of the piping and/or associated equipment downstream of the vaporizer.

This publication has been written to identify the hazards associated with cryogenic liquid vaporization systems and to recommend the safeguards to be taken. It recommends safe practice for the design of new cryogenic vaporizer systems. For existing systems, a risk assessment shall be undertaken to establish if any modifications are required.

Product Details

Edition:
2nd
Published:
12/18/2014
Number of Pages:
30
File Size:
1 file , 1.2 MB