C014 — Direct Integration of Flexible Photovoltaic with the Wall: A Simulation Approach to Determine Panel Performance
- Comments Off on C014 — Direct Integration of Flexible Photovoltaic with the Wall: A Simulation Approach to Determine Panel Performance
- ASHRAE
We defined building integrated photovoltaic stuck on 3 different constructions: concrete, polystyrene and metal plate. A combined thermo-power flow model was used to analyze and compare the panel performance for five different locations characterized by a different latitude along Europe. The model was defined in ESP-r and we used weather data from TMY (Typical Meteorological Year). The difference obtained in panel efficiency versus temperature was around 1% despite different building locations. The highest overheating and overcooling were observed for PV-ETICS and PV-steel constructions, while the PV-concrete case was characterized by fewer yearly temperature fluctuations. The effect of thermal inertia is visible for temperatures above 60°C in summer, which is not exceeded by PV-concrete despite location. Finally, the risk of acceleration of ageing due to working in temperatures above 80°C is possible in temperate climate with high irradiation (Athens).
Product Details
- Published:
- 2022
- Number of Pages:
- 8
- Units of Measure:
- Dual
- File Size:
- 1 file , 3.6 MB
- Product Code(s):
- D-BCS22-C014
- Note:
- This product is unavailable in Russia, Belarus
