SAE J518/1_202303

Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection – Part 1: 3.5 to 35 MPa (Code 61)
standard by SAE International, 03/01/2023

SAE J3203_202301

Wheel Radial Impact Test Procedure for Passenger Cars
standard by SAE International, 01/25/2023

SAE MA3340D

BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS5662, METRIC
standard by SAE International, 09/08/2022

SAE AMS4244D

Aluminum Alloy, Welding Wire 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti for Welding A206.0 Type Alloys
standard by SAE International, 08/09/2022

SAE AMS3400A

Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material
standard by SAE International, 09/08/2022

SAE AMS3095B

Paint System: High Gloss for Aircraft Exterior
standard by SAE International, 09/14/2022

SAE AMS2453A

Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel Parts Heat Treated to 180 ksi or Over
standard by SAE International, 09/08/2022

SAE AMS4500K

Copper, Sheet, Strip, and Plate Soft Annealed
standard by SAE International, 09/08/2022

SAE AMS2672H

Brazing, Aluminum Torch or Furnace
standard by SAE International, 09/08/2022

SAE AMS4315B

Aluminum Alloy, Sheet and Plate 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr 7075: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated
standard by SAE International, 08/17/2022