SAE J1907_202101

Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation (Stabilized: Jan 2021)
standard by SAE International, 01/07/2021

SAE ARP5430A

Human Interface Criteria for Vertical Situation Awareness Displays (Stabilized: Dec 2020)
standard by SAE International, 12/21/2020

SAE USCAR12-6

ELECTRICAL CONNECTOR DESIGN REQUIREMENTS
standard by SAE International, 01/20/2021

SAE J3230/1_202102

Kinematic Performance Metrics for Powered Standing Scooters
standard by SAE International, 02/04/2021

SAE AIR4092B

Investigation of PTFE "Melt" Phenomenon for High Pressure Hoses (Stabilized: Mar 2021)
standard by SAE International, 03/16/2021

SAE AMS5613S

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12.5Cr (SAE 51410) Annealed
standard by SAE International, 04/06/2021

SAE AS5169C

FITTING, PORT PLUG AND BLEEDER
standard by SAE International, 02/01/2021

SAE AMS4115K

Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings and Stock for Flash Welded Rings Annealed 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-O)
standard by SAE International, 04/14/2021

SAE J2554_202104

Engine Intake Air Water Separation Test Procedure
standard by SAE International, 04/22/2021

SAE MA3366A

BOLT, MACHINE – SPLINE DRIVE EXTENDED WASHER, DRILLED HEAD, FULL SHANK, LONG THREAD, NICKEL ALLOY (UNS N07718), METRIC
standard by SAE International, 03/30/2021