SAE J2985_201402
Definition and Measurement of Transfer Case Speed-Dependent Parasitic Loss
standard by SAE International, 02/17/2014
- Comments Off on SAE J2985_201402
- SAE
SAE J586_201106
Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
standard by SAE International, 06/15/2011
- Comments Off on SAE J586_201106
- SAE
SAE J485_201304
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins Superseding J485 MAY1998
standard by SAE International, 04/01/2013
- Comments Off on SAE J485_201304
- SAE
SAE J3138_201806
Diagnostic Link Connector Security
standard by SAE International, 06/02/2018
- Comments Off on SAE J3138_201806
- SAE
SAE J2891_201512
Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks Superseding J2891 JUL2010
standard by SAE International, 12/01/2015
- Comments Off on SAE J2891_201512
- SAE
SAE J800_200902
Motor Vehicle Seat Belt Assembly Installation
standard by SAE International, 02/25/2009
- Comments Off on SAE J800_200902
- SAE
SAE J461_200212
Wrought and Cast Copper Alloys
standard by SAE International, 12/20/2002
- Comments Off on SAE J461_200212
- SAE
SAE J3030_201507
Automotive Refrigerant Recovery/Recycling/Recharging Equipment Intended for use with Both R-1234yf and R-134a
standard by SAE International, 07/01/2015
- Comments Off on SAE J3030_201507
- SAE
SAE J836_201801
Automotive Metallurgical Joining (Stabilized: Jan 2018)
standard by SAE International, 01/10/2018
- Comments Off on SAE J836_201801
- SAE
SAE J2908_201709
Vehicle Power Test for Electrified Powertrains
standard by SAE International, 09/19/2017
- Comments Off on SAE J2908_201709
- SAE
