SAE J2763_200808
Test Procedure for Determining Refrigerant Emissions from Mobile Air Conditioning Systems
standard by SAE International, 08/28/2008
- Comments Off on SAE J2763_200808
- SAE
SAE J2494/1_201705
Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System (Stabilized: May 2017)
standard by SAE International, 05/30/2017
- Comments Off on SAE J2494/1_201705
- SAE
SAE J2697_201702
Inverter Requirements for Class Eight Trucks – Truck and Bus
standard by SAE International, 02/07/2017
- Comments Off on SAE J2697_201702
- SAE
SAE J2342_199901
Numbering Systems for End Mills
standard by SAE International, 01/20/1999
- Comments Off on SAE J2342_199901
- SAE
SAE J2650_201305
Performance Requirements for Light Emitting Diode (LED) Road Illumination Devices
standard by SAE International, 05/03/2013
- Comments Off on SAE J2650_201305
- SAE
SAE J2531_201604
Impulse Noise from Automotive Inflatable Devices
standard by SAE International, 04/29/2016
- Comments Off on SAE J2531_201604
- SAE
SAE J2438_199812
Low-Temperature Cranking Load Requirements of an Engine¿¿¿Air Starter Method
standard by SAE International, 12/01/1998
- Comments Off on SAE J2438_199812
- SAE
SAE J2495_201102
Thermal Containment Efficiency of Sleeve Materials (Stabilized: Feb 2011)
standard by SAE International, 02/21/2011
- Comments Off on SAE J2495_201102
- SAE
SAE J2321/1_201305
Disposable Hydraulic Filter Element – 115 L/min Flow, 1.0 MPa Collapse Pressure, Filtration Ratio = 75 at 6 and 10 ¿¿m
standard by SAE International, 05/31/2013
- Comments Off on SAE J2321/1_201305
- SAE
SAE J2694_200909
Anti-Noise Brake Pads Shims: T-pull Test
standard by SAE International, 09/30/2009
- Comments Off on SAE J2694_200909
- SAE
