SAE AS6072A

BUSHING, SLEEVE, PLAIN INNER BORE LINER
standard by SAE International, 09/21/2021

SAE AMS2759/2K

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
standard by SAE International, 07/07/2021

SAE AS85485/11B

CABLE, ELECTRIC, FILTER LINE, SMALL DIAMETER, UNSHIELDED, UNJACKETED, MULTIPLE-COMPONENT, RADIO FREQUENCY ABSORPTIVE, 150 ¿¿C, 600-VOLT (Stabilized: Jul 2021)
standard by SAE International, 07/15/2021

SAE AS4108/2A

T-BOLT, A-286, 1000 ¿¿F BUSHING HEAD
standard by SAE International, 08/26/2021

SAE AS9968A

Laboratory Viscosity Measurement of Thickened Aircraft Deicing/Anti-icing Fluids with a Viscometer
standard by SAE International, 07/23/2021

SAE AMS4910S

Titanium Alloy, Sheet, Strip, and Plate 5Al – 2.5Sn Annealed
standard by SAE International, 06/10/2021

SAE AS39029/124A

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES AS340X1 CONNECTORS AND AS95234 CONNECTORS)
standard by SAE International, 10/22/2021

SAE AMS5520H

Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr – 7.1Ni – 2.5Mo – 1.1Al Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 07/23/2021

SAE AS9578

BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, UNS S66286, SILVER PLATED, .4375-20UNJF-3A
standard by SAE International, 09/21/2021

SAE AMS4156L

Aluminum Alloy, Extrusions 0.68Mg – 0.40Si (6063-T6) Solution and Precipitation Heat Treated
standard by SAE International, 06/10/2021