SAE J2707_202106

Wear Test Procedure on Inertia Dynamometer for Brake Friction Materials
standard by SAE International, 06/10/2021

SAE AMS4762C

Silver Alloy, Brazing Filler Metal 40Ag – 30Cu – 30Zn 1245 to 1340 ¿¿F (674 to 727 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021

SAE AMS4128E

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
standard by SAE International, 06/28/2021

SAE AS6482

FITTING, TEE, BULKHEAD, FLARELESS ON THE SIDE, EXTERNAL SWAGE ON THE RUN, STANDARD AND REDUCER, HYDRAULIC, 3000 PSI
standard by SAE International, 09/01/2021

SAE AS9497

BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .7500-16 UNJF-3A
standard by SAE International, 07/23/2021

SAE AS39029/113C

CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
standard by SAE International, 05/28/2021

SAE AS6095B

FITTING, 37¿¿ SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE
standard by SAE International, 06/28/2021

SAE AMS5867C

Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
standard by SAE International, 10/01/2021

SAE AS21980A

FERRULE, OUTER, UNINSULATED, SHIELD TERMINATING, TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLES
standard by SAE International, 09/20/2021