SAE AMS2243L

Tolerances Corrosion and Heat-Resistant Steel Tubing
standard by SAE International, 06/29/2021

SAE AMS5897C

Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr – 11Ni – 0.80Cb (Nb) (SAE 30347) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper
standard by SAE International, 11/09/2021

SAE AMS4635H

Aluminum Bronze Bars, Rods, and Forgings 87Cu – 9Al – 3Fe Stress Relieved
standard by SAE International, 07/07/2021

SAE AMS7361

Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature -75 ¿¿F (-59 ¿¿C), 75 to 85 Type M Hardness For Seals in Hydraulic Systems
standard by SAE International, 07/23/2021

SAE AMS4773H

Silver Alloy, Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 ¿¿F (602 to 718 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021

SAE AMS2642F

Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
standard by SAE International, 11/03/2021

SAE AMS5690N

Steel, Corrosion and Heat Resistant, Wire 17Cr – 12Ni – 2.5Mo (316) Solution Heat Treated
standard by SAE International, 06/10/2021

SAE AMS7020

Aluminum Alloy Powder 7.0Si – 0.55Mg – 0.12Ti
standard by SAE International, 11/09/2021

SAE AMS4508J

Copper-Zinc Alloy, Laminated Sheet 70Cu – 30Zn Surface Bonded
standard by SAE International, 07/15/2021

SAE AMS4786K

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au – 8.0Pd – 22Ni 1845 to 1915 ¿¿F (1007 to 1046 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 08/27/2021