Standard Recommended Practice – Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service
standard by National Association of Corrosion Engineers, 10/15/2001
Standard Test Method – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
standard by National Association of Corrosion Engineers,
Standard Recommended Practice – Recommended Practice for Prevention, Detection and Correction of Deaerator Cracking
standard by National Association of Corrosion Engineers, 03/30/1996
A Review of Screening Tests for Gypsum Scale Removal Chemicals
Report / Survey by National Association of Corrosion Engineers, 03/01/2003
Petroleum and Natural Gas industries – Materials for use in H2S-containing environments in oil and gas production – Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons and Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys Circular 4
standard by National Association of Corrosion Engineers, 04/02/2014
Slow Strain Rate Test Method for Screening Corrosion Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service
standard by National Association of Corrosion Engineers, 01/01/1998
Standard Material Requirements – Methods for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments
standard by National Association of Corrosion Engineers, 01/17/2003
Standard Test Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler Tubes by the Glass-Bead-Blasting Technique
standard by National Association of Corrosion Engineers, 04/24/1999
Standard Recommended Practice – Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment
standard by National Association of Corrosion Engineers, 01/01/1993
Considerations for Water Reuse in Industrial Plants
Report / Survey by National Association of Corrosion Engineers, 05/01/1997
