IEC 60544-2 Ed. 2.0 b:1991

Guide for determining the effects of ionizing radiation on insulating materials – Part 2: Procedures for irradiation and test
standard by International Electrotechnical Commission, 08/23/1991

IEC 60745-2-13 Ed. 2.1 b:2011

Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 04/14/2011

IEC 60728-3-1 Ed. 1.0 b:2012

Cable networks for television signals, sound signals and interactive services – Part 3-1: Active wideband equipment for cable networks – Methods of measurement of non-linearity for full digital channel load with DVB-C signals
standard by International Electrotechnical Commission, 07/06/2012

IEC 60667-3-1 Ed. 1.0 b:1986

Specification for vulcanized fibre for electrical purposes – Part 3-1: Specifications for individual materials – Flat sheets
standard by International Electrotechnical Commission, 09/30/1986

IEC 60603-8 Ed. 1.0 b:1991

Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm
standard by International Electrotechnical Commission, 01/20/1991

IEC 60384-8 Ed. 3.0 b:2005

Fixed capacitors for use in electronic equipment – Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
standard by International Electrotechnical Commission, 05/19/2005

IEC 60335-2-73 Amd.1 Ed. 2.0 b:2006

Amendment 1 – Household and similar electrical appliances – Safety – Part 2-73: Particular requirements for fixed immersion heaters
Amendment by International Electrotechnical Commission, 01/23/2006

IEC 60724 Ed. 3.0 b:2000

Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<i>U</i><sub>m</sub> = 1,2 kV) and 3 kV (<i>U</i><sub>m</sub> = 3,6 kV)
standard by International Electrotechnical Commission, 10/09/2000

IEC 60721-3-3 Ed. 2.2 b:2002

Classification of environmental conditions – Part 3-3: Classification of groups of environmental parameters and their severities – Stationary use at weatherprotected locations CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 10/22/2002

IEC 60603-13 Ed. 1.0 b:1995

Connectors for frequencies below 3 MHz for use with printed boards – Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
standard by International Electrotechnical Commission, 01/25/1995