IEC 60335-2-91 Ed. 2.0 en:2002

Household and similar electrical appliances – Safety – Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
standard by International Electrotechnical Commission, 08/12/2002

IEC 60684-3-233 Ed. 2.0 en:2006

Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
standard by International Electrotechnical Commission, 01/17/2006

IEC 60335-2-90 Ed. 4.1 en:2019

Household and similar electrical appliances – Safety – Part 2-90: Particular requirements for commercial microwave ovens CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 11/15/2019

IEC 60603-7-41 Ed. 1.0 b:2010

Connectors for electronic equipment – Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
standard by International Electrotechnical Commission, 03/10/2010

IEC 60512-14-6 Ed. 1.0 b:2006

Connectors for electronic equipment – Tests and measurements – Part 14-6: Sealing tests – Test 14f: Interfacial sealing
standard by International Electrotechnical Commission, 03/23/2006

IEC 60598-2-20 Ed. 2.2 b:2002

Luminaires – Part 2-20: Particular requirements – Lighting chains CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 05/29/2002

IEC 60512-16-16 Ed. 1.0 b:2008

Connectors for electronic equipment – Tests and measurements – Part 16-16: Mechanical tests on contacts and terminations – Test 16p: Torsional strength, fixed male tabs
standard by International Electrotechnical Commission, 07/21/2008

IEC 60642-2 Ed. 1.0 b:1994

Piezoelectric ceramic resonator units – Part 2: Guide to the use of piezoelectric ceramic resonator units
standard by International Electrotechnical Commission, 02/08/1994

IEC 60353 Amd.1 Ed. 2.0 b:2002

Amendment 1 – Line traps for a.c. power systems
Amendment by International Electrotechnical Commission, 04/30/2002

IEC 60603-3 Ed. 1.0 b:1987

Connectors for frequencies below 3 MHz for use with printed boards – Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
standard by International Electrotechnical Commission, 01/01/1987