IEC 60335-2-82 Ed. 2.0 b:2002

Household and similar electrical appliances – Safety – Part 2-82: Particular requirements for amusement machines and personal service machines
standard by International Electrotechnical Commission, 11/26/2002

IEC 60614-2-1 Ed. 1.0 b:1982

Specification for conduits for electrical installations. Part 2: Particular specifications for conduits. Section One: Metal conduits
standard by International Electrotechnical Commission, 01/01/1982

IEC 60603-4 Ed. 1.0 b:1987

Connectors for frequencies below 3 MHz for use with printed boards – Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
standard by International Electrotechnical Commission, 03/15/1987

IEC 60534-9 Ed. 1.0 b:2007

Industrial-process control valves – Part 9: Test procedure for response measurements from step inputs
standard by International Electrotechnical Commission, 09/10/2007

IEC 60664-3 Ed. 3.0 b:2016

Insulation coordination for equipment within low-voltage systems – Part 3: Use of coating, potting or moulding for protection against pollution
standard by International Electrotechnical Commission, 11/04/2016

IEC 60412 Ed. 2.0 b:2007

Nuclear instrumentation – Scintillation detectors – Nomenclature (identification) – Standard dimensions of scintillators
standard by International Electrotechnical Commission, 06/05/2007

IEC 60335-2-85 Amd.1 Ed. 2.0 b:2008

Amendment 1 – Household and similar electrical appliances – Safety – Part 2-85: Particular requirements for fabric steamers
Amendment by International Electrotechnical Commission, 04/09/2008

IEC 60601-2-3 Ed. 2.0 b:1991

Medical electrical equipment – Part 2: Particular requirements for the safety of short-wave therapy equipment
standard by International Electrotechnical Commission, 06/27/1991

IEC 60512-6-2 Ed. 1.0 b:2002

Connectors for electronic equipment – Tests and measurements – Part 6-2: Dynamic stress tests – Test 6b: Bump
standard by International Electrotechnical Commission, 02/21/2002

IEC 60512-11-3 Ed. 1.0 b:2002

Connectors for electronic equipment – Tests and measurements – Part 11-3: Climatic tests – Test 11c: Damp heat, steady state
standard by International Electrotechnical Commission, 02/22/2002