IEC 60235-5 Ed. 1.0 b:1972

Measurement of the electrical properties of microwave tubes. Part 5: Low-power oscillator klystrons
standard by International Electrotechnical Commission, 01/01/1972

IEC 60169-17 Amd.1 Ed. 1.0 b:1993

Amendment 1 – Radio-frequency connectors. Part 17: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with screw coupling – Characteristic impedance 50 ohms (Type TNC)
Amendment by International Electrotechnical Commission, 04/26/1993

IEC 60287-1-1 Ed. 1.2 b:2001

Electric cables – Calculation of the current rating – Part 1-1: Current rating equations (100 % load factor) and calculation of losses – General CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 11/23/2001

IEC 60169-1 Amd.1 Ed. 2.0 b:1996

Amendment 1 – Radio-frequency connectors. Part 1: General requirements and measuring methods
Amendment by International Electrotechnical Commission, 02/07/1996

IEC 60099-8 Ed. 2.0 en:2017

Surge arresters – Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
standard by International Electrotechnical Commission, 11/14/2017

IEC 60079-18 Ed. 2.0 b:2004

Electrical apparatus for explosive gas atmospheres – Part 18: Construction, test and marking of type of protection encapsulation "m" electrical apparatus
standard by International Electrotechnical Commission, 03/10/2004

IEC 60335-2-21 Ed. 5.0 b:2002

Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heaters
standard by International Electrotechnical Commission, 07/25/2002

IEC 60335-2-102 Ed. 1.1 b:2009

Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 01/28/2009

IEC 60204-32 Ed. 2.0 b:2008

Safety of machinery – Electrical equipment of machines – Part 32: Requirements for hoisting machines
standard by International Electrotechnical Commission, 03/10/2008

IEC 60317-29 Ed. 1.0 b:1990

Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
standard by International Electrotechnical Commission, 10/15/1990