IEC 60079-19 Ed. 2.0 b:2006

Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation
standard by International Electrotechnical Commission, 10/27/2006

IEC 60189-3 Ed. 3.0 b:1988

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples
standard by International Electrotechnical Commission, 06/30/1988

IEC 60050-551 Ed. 2.0 t:1998

International Electrotechnical Vocabulary (IEV) – Part 551: Power electronics
standard by International Electrotechnical Commission, 11/24/1998

IEC 60034-3 Ed. 7.0 b:2020

Rotating electrical machines – Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
standard by International Electrotechnical Commission, 05/26/2020

IEC 60060-2 Ed. 3.0 b:2010

High-voltage test techniques – Part 2: Measuring systems
standard by International Electrotechnical Commission, 11/29/2010

IEC 60094-7 Amd.1 Ed. 1.0 b:1996

Amendment 1 – Magnetic tape sound recording and reproducing systems. Part 7: Cassette for commercial tape records and domestic use
Amendment by International Electrotechnical Commission, 02/14/1996

IEC 60092-354 Ed. 4.0 b:2020

Electrical installations in ships – Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
standard by International Electrotechnical Commission, 02/06/2020

IEC 60238 Ed. 9.0 b:2016

Edison screw lampholders
standard by International Electrotechnical Commission, 07/14/2016

IEC 60027-4 Ed. 1.0 b:1985

Letter symbols to be used in electrical technology. Part 4: Symbols for quantities to be used for rotating electrical machines
standard by International Electrotechnical Commission, 09/30/1985

IEC 60072-2 Ed. 1.0 b:1990

Dimensions and output series for rotating electrical machines – Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
standard by International Electrotechnical Commission, 12/31/1990