IEC 60034-15 Ed. 2.0 b:1995

Rotating electrical machines – Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
standard by International Electrotechnical Commission, 01/30/1995

IEC 60168 Amd.2 Ed. 4.0 b:2000

Amendment 2 – Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
Amendment by International Electrotechnical Commission, 10/18/2000

IEC 60121 Ed. 1.0 b:1960

Recommendation for commercial annealed aluminium electrical conductor wire
standard by International Electrotechnical Commission, 01/01/1960

IEC 60094-6 Ed. 1.0 b:1985

Magnetic tape sound recording and reproducing systems. Part 6: Reel to reel systems
standard by International Electrotechnical Commission, 12/15/1985

IEC 60092-350 Ed. 5.0 b:2020

Electrical installations in ships – Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
standard by International Electrotechnical Commission, 01/28/2020

IEC 60107-5 Ed. 1.1 b:1999

Recommended methods of measurements on receivers for television broadcast transmissions – Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 06/04/1999

IEC 60051-8 Ed. 5.0 b:2017

Direct acting indicating analogue electrical measuring instruments and their accessories – Part 8: Special requirements for accessories
standard by International Electrotechnical Commission, 12/15/2017

IEC 62932-2-2 Ed. 1.0 b:2020

Flow battery energy systems for stationary applications – Part 2-2 Safety requirements
standard by International Electrotechnical Commission, 02/18/2020

IEC 60118-2 Amd.2 Ed. 2.0 b:1997

Amendment 2 – Hearing aids. Part 2: Hearing aids with automatic gain control circuits
Amendment by International Electrotechnical Commission, 05/16/1997

IEC 60974-10 Ed. 4.0 b:2020

Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
standard by International Electrotechnical Commission, 04/15/2020