IEC 61300-2-4 Amd.1 Ed. 2.0 b:2020

Amendment 1 – Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-4: Tests – Fibre or cable retention
Amendment by International Electrotechnical Commission, 01/23/2020

IEC 60122-1 Amd.1 Ed. 3.0 en:2017

Amendment 1 – Quartz crystal units of assessed quality – Part 1: Generic specification
Amendment by International Electrotechnical Commission, 12/08/2017

IEC 62052-11 Ed. 2.0 en:2020

Electricity metering equipment – General requirements, tests and test conditions – Part 11: Metering equipment
standard by International Electrotechnical Commission, 06/29/2020

IEC 60168 Ed. 4.2 b:2001

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 04/19/2001

IEC 60034-15 Ed. 2.0 b:1995

Rotating electrical machines – Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
standard by International Electrotechnical Commission, 01/30/1995

IEC 60168 Amd.2 Ed. 4.0 b:2000

Amendment 2 – Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
Amendment by International Electrotechnical Commission, 10/18/2000

IEC 60121 Ed. 1.0 b:1960

Recommendation for commercial annealed aluminium electrical conductor wire
standard by International Electrotechnical Commission, 01/01/1960

IEC 60094-6 Ed. 1.0 b:1985

Magnetic tape sound recording and reproducing systems. Part 6: Reel to reel systems
standard by International Electrotechnical Commission, 12/15/1985

IEC 60092-350 Ed. 5.0 b:2020

Electrical installations in ships – Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
standard by International Electrotechnical Commission, 01/28/2020

IEC 60107-5 Ed. 1.1 b:1999

Recommended methods of measurements on receivers for television broadcast transmissions – Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 06/04/1999