IEC 61347-2-11 Ed. 1.1 b:2017

Lamp controlgear – Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 07/13/2017

IEC 61290-7-1 Ed. 1.0 b:1998

Optical fibre amplifiers – Basic specification – Part 7-1: Test methods for out-of-band insertion losses – Filtered optical power meter
standard by International Electrotechnical Commission, 04/23/1998

IEC 61249-2-5 Ed. 1.0 b:2003

Materials for printed boards and other interconnecting structures – Part 2-5: Reinforced base materials, clad and unclad – Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad
standard by International Electrotechnical Commission, 11/12/2003

IEC 61302 Ed. 1.0 b CORR1:1995

Corrigendum 1 – Electrical insulating materials – Method to evaluate the resistance to tracking and erosion – Rotating wheel dip test
Corrigenda by International Electrotechnical Commission, 09/01/1995

IEC 61196-1-308 Ed. 1.0 b:2005

Coaxial communication cables – Part 1-308: Mechanical test methods – Test for tensile strength and elongation for copper-clad metals
standard by International Electrotechnical Commission, 07/26/2005

IEC 61660-1 Ed. 1.0 b:1997

Short-circuit currents in d.c. auxiliary installations in power plants and substations – Part 1: Calculation of short-circuit currents
standard by International Electrotechnical Commission, 06/17/1997

IEC 61248-6 Ed. 1.0 b:1996

Transformers and inductors for use in electronic andtelecommunication equipment – Part 6: Sectional specification forinductors on the basis of the capability approval procedure
standard by International Electrotechnical Commission, 06/06/1996

IEC 61189-3 Ed. 2.0 b:2007

Test methods for electrical materials, printed boards and other interconnection structures and assemblies – Part 3: Test methods for interconnection structures (printed boards)
standard by International Electrotechnical Commission, 10/09/2007

IEC 61511-3 Ed. 1.0 b:2003

Functional safety – Safety instrumented systems for the process industry sector – Part 3: Guidance for the determination of the required safety integrity levels
standard by International Electrotechnical Commission, 03/18/2003

IEC 61249-2-30 Ed. 1.0 b:2012

Materials for printed boards and other interconnecting structures – Part 2-30: Reinforced base materials clad and unclad – Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad
standard by International Electrotechnical Commission, 11/29/2012