IEC 61284 Ed. 2.0 b:1997

Overhead lines – Requirements and tests for fittings
standard by International Electrotechnical Commission, 09/17/1997

IEC 61326-2-2 Ed. 1.0 b CORR1:2007

Corrigendum 1 – Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and perofrmance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution system
Corrigenda by International Electrotechnical Commission, 11/14/2007

IEC 61260-2 Ed. 1.0 b:2016

Electroacoustics – Octave-band and fractional-octave-band filters – Part 2: Pattern-evaluation tests
standard by International Electrotechnical Commission, 03/23/2016

IEC 61580-7 Ed. 1.0 b:1996

Methods of measurement for waveguides – Part 7: Graphical method for the determination of waveguide performance
standard by International Electrotechnical Commission, 06/11/1996

IEC 61249-2-45 Ed. 1.0 en:2018

Materials for printed boards and other interconnecting structures – Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m¿¿¿K) and defined flammability (vertical burning test), copper-clad fo
standard by International Electrotechnical Commission, 01/10/2018

IEC 61587-6 Ed. 1.0 b:2017

Mechanical structures for electrical and electronic equipment – Tests for IEC 60917 and IEC 60297 series – Part 6: Security aspects for indoor cabinets
standard by International Electrotechnical Commission, 05/19/2017

IEC 61290-5-1 Ed. 2.0 b:2006

Optical amplifiers – Test methods – Part 5-1: Reflectance parameters – Optical spectrum analyzer method
standard by International Electrotechnical Commission, 05/29/2006

IEC 61514-2 Ed. 2.0 b:2013

Industrial process control systems – Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
standard by International Electrotechnical Commission, 06/27/2013

IEC 61169-1 Ed. 2.0 b:2013

Radio frequency connectors – Part 1: Generic specification – General requirements and measuring methods
standard by International Electrotechnical Commission, 07/10/2013

IEC 61158-4-18 Ed. 1.0 en:2007

Industrial communication networks – Fieldbus specifications – Part 4-18: Data-link layer protocol specification – Type 18 elements
standard by International Electrotechnical Commission, 12/14/2007