IEC 61249-2-10 Ed. 1.0 b:2003

Materials for printed boards and other interconnecting structures – Part 2-10: Reinforced base materials clad and unclad – Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
standard by International Electrotechnical Commission, 02/27/2003

IEC 61241-2-3 Ed. 1.0 b:1994

Electrical apparatus for use in the presence of combustible dust – Part 2: Test methods – Section 3: Method for determining minimum ignition energy of dust/air mixtures
standard by International Electrotechnical Commission, 09/28/1994

IEC 61156-2-2 Ed. 1.0 b:2001

Multicore and symmetrical pair/quad cables for digital communications – Part 2-2: Horizontal floor wiring – Capability Approval – Sectional specification
standard by International Electrotechnical Commission, 02/27/2001

IEC 61300-3-38 Ed. 1.0 b:2012

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-38: Examinations and measurements – Group delay, chromatic dispersion and phase ripple
standard by International Electrotechnical Commission, 05/29/2012

IEC 61280-1-3 Ed. 2.0 b:2010

Fibre optic communication subsystem test procedures – Part 1-3: General communication subsystems – Central wavelength and spectral width measurement
standard by International Electrotechnical Commission, 03/18/2010

IEC 61249-2-33 Ed. 1.0 b:2009

Materials for printed boards and other interconnecting structures – Part 2-33: Reinforced base materials, clad and unclad – Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (verti
standard by International Electrotechnical Commission, 02/11/2009

IEC 61217 Amd.2 Ed. 1.0 b:2007

Amendment 2 – Radiotherapy equipment – Coordinates, movements and scales
Amendment by International Electrotechnical Commission, 11/07/2007

IEC 61535 Amd.1 Ed. 1.0 b:2012

Amendment 1 – Installation couplers intended for permanent connection in fixed installations
Amendment by International Electrotechnical Commission, 05/16/2012

IEC 61347-2-11 Amd.1 Ed. 1.0 b:2017

Amendment 1 – Lamp controlgear – Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
Amendment by International Electrotechnical Commission, 07/13/2017

IEC 61300-3-21 Ed. 3.0 b:2019

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-21: Examinations and measurements – Switching time
standard by International Electrotechnical Commission, 09/20/2019