IEC 61124 Ed. 2.0 b:2006

Reliability testing – Compliance tests for constant failure rate and constant failure intensity
standard by International Electrotechnical Commission, 03/15/2006

  • by admin
  • Comments Off on IEC 61124 Ed. 2.0 b:2006
  • IEC

IEC 61300-3-25 Ed. 1.0 b:1997

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-25: Examinations and measurements – Concentricity of the ferrules and ferrules with fibre installed
standard by International Electrotechnical Commission, 03/12/1997

  • by admin
  • Comments Off on IEC 61300-3-25 Ed. 1.0 b:1997
  • IEC

IEC 61196-1-201 Ed. 1.0 en:2009

Coaxial communication cables – Part 1-201: Environmental test methods – Test for cold bend performance of cable
standard by International Electrotechnical Commission, 02/11/2009

  • by admin
  • Comments Off on IEC 61196-1-201 Ed. 1.0 en:2009
  • IEC

IEC 61189-5 Ed. 1.0 b:2006

Test methods for electrical materials, interconnection structures and assemblies – Part 5: Test methods for printed board assemblies
standard by International Electrotechnical Commission, 08/29/2006

  • by admin
  • Comments Off on IEC 61189-5 Ed. 1.0 b:2006
  • IEC

IEC 61330 Ed. 1.0 b:1995

High-voltage/low voltage prefabricated substations
standard by International Electrotechnical Commission, 12/05/1995

  • by admin
  • Comments Off on IEC 61330 Ed. 1.0 b:1995
  • IEC

IEC 61304 Ed. 1.0 b:1994

Nuclear instrumentation – Liquid-scintillation counting systems – Performance verification
standard by International Electrotechnical Commission, 05/31/1994

  • by admin
  • Comments Off on IEC 61304 Ed. 1.0 b:1994
  • IEC

IEC 61249-2-34 Ed. 1.0 b:2009

Materials for printed boards and other interconnecting structures – Part 2-34: Reinforced base materials, clad and unclad – Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (verti
standard by International Electrotechnical Commission, 02/11/2009

  • by admin
  • Comments Off on IEC 61249-2-34 Ed. 1.0 b:2009
  • IEC

IEC 61238-1-3 Ed. 1.0 b:2018

Compression and mechanical connectors for power cables – Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U<sub>m</sub> = 1,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) tested on non-insulated conductors
standard by International Electrotechnical Commission, 05/08/2018

  • by admin
  • Comments Off on IEC 61238-1-3 Ed. 1.0 b:2018
  • IEC

IEC 61217 Amd.1 Ed. 1.0 b:2000

Amendment 1 – Radiotherapy equipment – Coordinates, movements and scales
Amendment by International Electrotechnical Commission, 12/21/2000

  • by admin
  • Comments Off on IEC 61217 Amd.1 Ed. 1.0 b:2000
  • IEC

IEC 61158-6-23 Ed. 2.0 en:2019

Industrial communication networks – Fieldbus specifications – Part 6-23: Application layer protocol specification – Type 23 elements
standard by International Electrotechnical Commission, 06/20/2019

  • by admin
  • Comments Off on IEC 61158-6-23 Ed. 2.0 en:2019
  • IEC