AASHTO M 138M/M 138-07

Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
standard by American Association of State and Highway Transportation Officials, 08/01/2008

AASHTO TP 65-03

Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
standard by American Association of State and Highway Transportation Officials,

AASHTO T 97-10

Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (ASTM Designation: C 78-08)
standard by American Association of State and Highway Transportation Officials, 2010

AASHTO T 85-91 (2004)

Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
standard by American Association of State and Highway Transportation Officials,

AASHTO T 180-18

Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
standard by American Association of State and Highway Transportation Officials, 2018

AASHTO PP 93-18

Standard Specification for Asphalt Tack Coat Design
standard by American Association of State and Highway Transportation Officials, 2018

AASHTO MBE-1-M

Manual for Bridge Evaluation, 1st Edition, with 2010 Interim Revisions
standard by American Association of State and Highway Transportation Officials, 2008

AASHTO PP 62-10

Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
standard by American Association of State and Highway Transportation Officials, 2010

AASHTO PH08-1

Practioner's Handbook #8: Developing and Implementing an Environmental Management System in a State Department of Transportation
Handbook / Manual / Guide by American Association of State and Highway Transportation Officials, 01/01/2007

AASHTO M 242M/M 242-12

Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (ASTM C655M-11 and C655-11)
standard by American Association of State and Highway Transportation Officials, 2012