ASAE/ASABE ISO 12003-2:2008

Click here to purchase
This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protectivestructures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines theclearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, andis applicable to tractors so equipped having the following characteristics.

  • A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings(not considering lower points on the axle differential).
  • A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted withthe widest specified tyres, and with the overall width of the other axle being less than that of the first axle.
  • A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largestsize recommended by the manufacturer.

Product Details

Published:
09/01/2017
ANSI:
ANSI Approved
Number of Pages:
34
File Size:
1 file , 1.6 MB
Same As:
ISO 12003-2:2008, BS ISO 12003-2:2008, CAN/CSA M12003-2-09 (R2014)

Related Posts